Corner sinks in the bathroom: general overview + installation instructions
The choice in favor of sanitary equipment of an unusual configuration encourages the desire to make the most convenient limited space. This task is also solved by the corner sink in the bathroom, the installation of which allows the use of a previously empty area.
Such products are comfortable, functional, have an extraordinary design.
Types of corner sinks
Corner sinks are sometimes the only option for a rational arrangement of sanitary appliances and furniture in a small bathroom. These products are classified according to the method of installation, form, material.
Angle models according to the installation method
These corner sinks, depending on the order of installation, are produced in different versions:
- in the shape of a tulip;
The first model comes complete with a 0.7–0.8 m leg. This part is very useful: on the one hand, it masks the pipeline and siphon, on the other - the remaining space under the sink cannot be used completely.But such shells are produced in rich colors and, as a rule, are beautifully decorated.
Suspended sink opens up prospects for a more rational use of space. It may be enough to place some objects under it, and even a washing machine. To fit this unit, you need an angled sink with a flat bottom and a siphon of special design. This option is ideally compatible with the top of the washing machine.
Suspended sinks or consoles, as they are also called, are fixed to the wall with special brackets. The mixer is mounted on the sink or to the wall. Their height can be changed based on their own needs. Finds its supporters and such a modern solution, as the installation of invoice sinks on the suspended worktop.
A recessed corner sink may seem cumbersome. Under it really need more space than the first two species. But the curbstone, in which it is built in, will hide sewer communications, will serve as storage for many necessary things in the bathroom. In addition to the cabinets, the hanging table top can serve as an installation place for the hanging sink.
Usually the sink and cupboard to it are sold in the kit. Models have different dimensions. Side cabinets in contact with the walls, have a length of from 35 to 70 cm. Manufacturers produce similar models in two versions - right and left. In the first embodiment, the sink is placed on the left, in the left-side - vice versa.
Classification in the form of plumbing
According to their constructive solution, there are corner shells of both traditional triangular shape and asymmetrical, elongated. The shape of the triangle saves the maximum area. Such a sink can be embedded in the smallest bathrooms. If there is no place at all, a triangular suspension model can be placed above the bath.
Models in which one side is significantly longer than the other, fit well into an elongated bathroom. Their use gives broad prospects for the design of compact bathrooms.
Types of sinks depending on the material
Corner sinks are made from both materials that have long become traditional, as well as from unusual ones that have been used quite recently. Each has its advantages and not quite positives. Old materials include ceramics, metal. New trend - use for the production of glass sinks, artificial stone, wood.
The most familiar in the bathroom faience (ceramics). It is durable, hygienic, smooth and pleasant to touch. Color, most often, white, but different colors are possible. The strength characteristics are high and care is uncomplicated.
The lack of faience - porosity, its durability depends on the quality of the glaze applied to the surface. This type of pottery, as porcelain is more beautiful, but is more fragile. The faience sink, decorated with a woven pattern over the entire surface or only around the perimeter, looks naturally in a bathroom decorated in Provence and Country styles.
Porcelain models differ little in value, unless it is hand painted. High quality clay is used for their production, the subsequent high-temperature annealing makes the material very dense. There are no rough edges on the surface of such a sink; it can be cleaned with any household chemicals. The advantage of ceramics is also in the fact that the water jet, in contact with it, does not make loud noises.
Metal sinks are most often found in the kitchen, but if the bathroom is decorated in a minimalist style, then the metal in it will look organic. Manufacturers paint their products with colored glaze, put embossed patterns, finish, imitating precious metals. The surface is both glossy and matte.
Shells are made of metals such as stainless steel, brass, copper, nickel, bronze. When installing plumbing from metal alloys in a bathroom, it is necessary to select appropriate accessories.
Sanitary ware, which brings lightness and a sense of spaciousness to the interior of the most constrained bathroom, is a glass sink. For the manufacture of glass sinks their creators use tempered glass of a certain thickness - 15 mm or more. Color, shape of products are varied.
By strength, these glass products are comparable to porcelain stoneware. They are well perceived cleaning aggressive chemicals, sudden changes in water temperature. But hard brushes and abrasives should not be used.
Practical, these beautiful, elegant products are no different. So that they look neat, need daily care. The main enemy - the stains, drips, clearly visible to the naked eye. After each wash, wipe it dry, otherwise the water drops will dry and leave an ugly mark.
Corner sink superstable to cracking and delamination, designed for a bath of natural stone. Usually use granite or marble. These products look solid, are always exclusive, because two identical stones in nature do not exist. They create an aura of reliability, special coziness, comfort.
The stone has a high resistance to mechanical damage, a fungus will not appear on its surface. Scratches are easily removed by sanding. Their cost is quite high. Having decided to invest in a stone sink, you should know that it is afraid of acidic and alkaline-containing substances. If serious damage occurs, the sink will not be restored.
Visually distinguish natural stone from artificial only by an experienced specialist. The surface of the composite shell is equally hard, resists well to mechanical stress, but artificial material resists shocks better. The price is much lower.
Among the disadvantages of an acrylic stone, it should be noted that its service life is lower than that of a natural material due to the presence of seams. Do not allow the means to clean the sinks on the surface of artificial stone sinks.
Microconcrete is an unconventional material that is adapted to receive sinks in the bathroom. The material is completely safe because of its environmental friendliness. It is easy to maintain, resistant to mechanical stress, but temperature surges are dangerous for it. Basically, such shells need to make an individual order.
Micro-concrete, no matter how high-quality it is, is hygroscopic, therefore it becomes darker with time. The seams of such a shell are missing, and this indicates that dirt on its surface will not accumulate.
The category of elite include shells made of wood. They are made of wood of durable moisture-resistant species: teak, hornbeam, larch, oak, cedar, and others. There are models of bamboo. Such products are polished, several times covered with stain, varnish, so they are reliably protected from mold. The shape of the shell can be any.
Caring for these noble products need special.Cleaners - only soft, no scratching, sharp objects. Required for the sink of wood and periodic restoration - every 3-4 years. So, the price of this service should also be added to the considerable cost of the shell itself.
Wooden shells are decorated with painting, carving, polishing the surface to a mirror shine, but the best decoration is a design created by nature. The value of wood products affects the cost of products, but they are never cheap. They are not made on the conveyor, that neither the model, it is almost exclusive.
Corner sink installation
For the constrained area plumbing is chosen based on its ergonomics. The technology of installation depends on the type of corner model and is almost the same as for conventional analogues. They are fastened most often with the help of brackets, but they also use anchors, studs, dowels. Before buying, you need to make measurements of the room and calculate the size of the sink, taking into account the location of the entrance and exit of sewer and water pipelines.
Installing a suspended shell
Suspended corner washbasins are fixed to the corner walls with the help of consoles. This mounting method creates a rigid, secure fit. Experts advise to follow two rules:
- The best installation site is located in the area of sewer and water pipes.
- The optimum height from the floor - within 0.9 - 0.98 m.
Light suspended shells attached to the screws, dowels. For stone products, this method of installation is not suitable because of their great weight. A more reliable support is needed here, therefore the shell is fixed with the help of special brackets. The walls to which the corner piece is fastened must be strong, plasterboard partitions will not be suitable for this purpose.
In the area where the sink will contact the wall, draw a horizontal line to the floor using a level. They mark the places for the mounting pins on the surface, then drill the holes, screw in the dowels, screw the pins to a certain depth. A pin with a length equal to the width of the shell plus 1.5 cm should remain outside, otherwise there will be no place to tighten the nuts after installation.
Before fixing the sink, the mixer is mounted on it, after having twisted into it flexible hoses and studs. In the hole pull the hose supplying water, putting a seal on it. Following the seal, put on a washer, tighten the nuts on all hoses.
The threaded part of the angle valves is coated with a sealant, wrapped with hemp and twisted. On the back side of the shell put putty. Sink set up on the studs. They are put on seals made of plastic or elastic rubber, washers, then tighten the nuts.
So that the forces evenly act on the sink, the nuts are tightened alternately. After the final fixation of the sink, it is connected to the water supply and sewerage. The flexible connection on one side is connected to the water pipe, and the other to the mixer through the corresponding connections.
Discharge sewer pipe can be held in the wall or under the floor. It is necessary to find the outlet in it and screw the inlet pipe inlet siphon into it.To the joint did not allow all kinds of flavors into the room, it should be sealed with a rubber ring. An overflow pipe is attached to the outlet when an overflow hole is present in the sink.
Installation of a built-in corner sink
When you purchase a sink with a bedside table, there must be an opening in the latter in which all pipes and siphons will fit comfortably. The doors in the cabinet should open freely and not cling to equipment or furniture standing nearby. The cupboard is installed first, followed by the sink, then pipes and siphon.
Placing a bedside table in the corner, adjust the legs, try on the sink. Next, mark the place of fasteners, make holes in the wall. After that, the nightstand is fixed and mounted everything else.
Installing the sink on a pedestal
The sink should tightly enter the place intended for it. When installing plumbing of the "tulip" type, an important role is played by proper marking. Lines need to be applied extremely precisely, controlling the process by hydraulic level.They fix it the same way as the outboard one, but it has additional support.
The technology is simple:
- Mark and prepare space for pipes. Attach shut-off valves.
- Place the leg in the corner, put a sink on it. Having pulled the construction close to the wall, they draw a horizontal line, mark the locations of the fasteners.
- In the walls they make holes for dowels. Installing the latter, they screw in studs.
- Wash basin put on studs, tighten the nuts through the gaskets.
- The corrugated hose is inserted into the hole intended for draining, the siphon is screwed.
- Combining flexible hoses with a mixer, insert the latter into its intended place on the sink. Next, connect the hoses for heated and cold water with the corresponding outlets, connect the stop plumbing fittings.
At the end, under the sink slip foot. Then they align everything, check the horizontal position and fix the structure by tightening the nuts under the sink.
Corner Shell Manufacturers
The range of corner sinks on the market is huge, which complicates the selection. In order not to purchase a product with a marriage, should be guided by well-known manufacturers.Among domestic companies are the brands "Aquaton", Astra-form, "Keramin", 1MarKa. They produce models from all sorts of materials, but most of it comes to ceramics.
Imported products are represented by such trademarks as SVEDBERGS, GUSTAVSBERG (Sweden), CEZARES, GLOBO (Italy), KERAMAG, KOHLER, Villeroy & Boch (Germany). Popular brands are JIKA RAVAK (Czech Republic), SANINDUSA (Portugal), Delafon (France), Roca (Spain), KOLO (Poland).
Conclusions and useful video on the topic
The video shows the installation process of the embedded shell of an ordinary one, but the same technology is used to install the corner model:
Errors made during installation of sinks and their elimination:
Even a very small bathroom can look stylish. Beautiful corner sink in the interior changes and unites the space. The main thing, when choosing it, is to preserve the whole style of the room Installation is not very complicated, but all recommendations should be followed in the sequence outlined.